Pausing Printing - Oce CS2436 User Manual

Basic Printing Workflow (CS2436-1)
1. 3. 1.
Basic Printing Workflow > Pausing Printing >

Pausing Printing

During printing, if you set Pause Print in the Control Panel menu to On, printing is stopped at that point
and the printer enters a state in which printing is paused. (See "Control Panel Display (8.2.3).")
Printing from the job queue is not possible in this state.
To restore normal operation after this state, set Pause Print to Off.
Note
In the following cases, the status is cleared even if you do not set Pause Print to
Off, and printing from the job queue resumes.
When paper is advanced
When you execute Chg. Paper Type in the Paper Menu
1.
During printing, on the Tab Selection screen of the Control Panel, press
Job tab (
Note
2.
Press the OK button.
The Job Menu is displayed.
3.
Press or
4.
Press or
).
If the Tab Selection screen is not displayed, press the Menu button.
to select Pause Print, and then press the OK button.
to select On or Off, and then press the OK button.
or to select the