Oce CS2436 User Manual page 725

Troubleshooting (CS2436-11)
11. 8. 10.
Troubleshooting > HP-GL/2 problems >
The printer stops when printing a HP-GL/2 job (the carriage
stops moving)
Cause
The printer is analyzing the
print job.
A job was printed when
Input Resolution in the
Control Panel menu was set
to 600dpi.
Corrective Action
Please wait a while until printing is finished.
In the Control Panel menu, set Input
Resolution to 300dpi and print again.
(See "Menu Settings (8.2.8).")