Configuring Netware Network Settings - Oce CS2436 User Manual

Network Setting (CS2436-9)
9. 2. 7.
Network Setting > Network Setting (Windows) >

Configuring NetWare Network Settings

To print over a NetWare network, configure the network environment as follows.
Important
To configure network settings, you must be logged in with administrative
rights such as Administrator account. We recommend that your network
administrator configure the network settings.
1.
Specify the Ethernet frame type for communication between the printer and computers.
For instructions, see "Specifying the Printer's Frame Type (9.2.4)."
2.
Specify the NetWare print services, including the print server and queue.
For instructions, see "Specifying NetWare Print Services (9.2.5)."
3.
Specify NetWare protocol details besides the frame type.
For instructions, see "Specifying NetWare Protocols (9.2.6)."
After you have completed the steps above, configure each computer for printing over the
NetWare network.
4.
Connect to the NetWare network.
Install NetWare client software on each computer to be used for printing over the network,
and log in to the NetWare server or tree. For instructions on connection, refer to the
NetWare and operating system documentation.
5.
Install the printer driver.
Follow the instructions of your network administrator to install the printer driver on each
computer to be used for printing. When installing the printer driver, choose Network
Printer as the printer destination, and then choose the print queue created from the
NetWare print service settings.
6.
Follow these steps to configure the printer port. This step is not necessary if you specified
the printer destination during installation of the printer driver.
1.
Open the Printers and Faxes (or Printers ) window.
2.
Right-click the printer icon and choose Properties.
3.
Click the Port (or Advanced ) tab to display the Port (or Advanced ) sheet.
4.
As the destination port, specify the print queue created by configuring the NetWare
print service settings.