Oce CS2436 User Manual page 598

Network Setting (CS2436-9)
9. 2. 9.
Network Setting > Network Setting (Windows) >
Configuring the IP Address Using Device Setup Utility
On a computer running Windows, you can use Device Setup Utility provided with the printer to
configure the printer's IP address. This topic describes how to configure the IP address using
Device Setup Utility.
Important
To configure network settings, you must be logged in with administrative
rights such as Administrator account. We recommend that your network
administrator configure the network settings.
For instructions on installing Device Setup Utility, see "Installing Device
Setup Utility (9.2.8)."
When specifying an IPv4 IP address
1.
Start Device Setup Utility from the start menu.
2.
In the Device Name list displayed, select the printer to configure.
3.
Choose Protocol Settings from the Printer menu.
4.
Select the IPv4 tab.
5.
In the Setting IP Address list, choose Manual.
6.
Enter the IP address assigned to the printer and click the Set button.
7.
Click OK after the Confirmation message is displayed.
8.
Exit Device Setup Utility.
Note
To configure the IP address automatically, choose Auto in the Setting IP
Address list and select DHCP, BOOTP, or RARP.
You can also specify the subnet mask and default gateway.
When specifying an IPv6 IP address
1.
Start Device Setup Utility from the start menu.
2.
In the Device Name list displayed, select the printer to configure.
3.
Choose Protocol Settings from the Printer menu.
4.
Select the IPv6 tab.
5.
In IPv6, select On.