Oce CS2436 User Manual page 531

Printer Parts (CS2436-8)
Quality Manager
Paper Manager
Color
Mode
Color (CAD) 3
Color (CAD) 4
Color (CAD) 5
Print Quality
Input Resolution
Print (Economy)
Paper Source
Margin
Conserve Paper
Auto Rotate
Enable merge
Select Palette
Print emulating the following printers,
in colors resembling colors produced
by these printers: Océ iPF500, iPF600,
iPF700, iPF510, iPF610, iPF710,
iPF605, iPF720, iPF810, and iPF820.
(*2)
Print emulating the HP Designjet
500/800, in colors resembling colors
produced by these printers.(*2)
Print emulating the HP Designjet
1000, in colors resembling colors
produced by this printer.(*2)
Choose the print quality.
Choose the printer input resolution,
600dpi or 300dpi.
Although printing quality is
diminished, less ink is consumed than
in regular printing. Select On to
conserve ink.
Choose the source of paper for HP-
GL/2 printing.
Specify the margin around paper. The
margin for the trailing edge of sheets
is 23 mm (0.9 in).
However, if you have specified the
leading margin in Paper Details, the
value in Paper Details has priority.
Conserves paper when printing.
If the long side of an original is
shorter than the roll width, the
original is automatically rotated 90
degrees to conserve paper. Similarly,
if the long side of an original in
landscape orientation is longer than
the roll width and the short side is
shorter than the roll width, the
original is repositioned to fit on the
paper.
HP RTL print jobs are not rotated.
Because HP RTL images are not
rotated even if the paper is rotated 90
degrees, images may be cut off or the
blank paper may be ejected. In this
case, set Auto Rotate to Off.
Specify whether to merge or print
over colors where lines overlap.
Choose Off to print the second line
over the first. Choose On to merge all
overlapping colors.
As pen values, choose Software,
Palette A, Palette B, or Factory.
Choose Software to print according
to software settings. Choose Palette
A or Palette B to print using the
value specified in Define Palette.