Adjusting The Vacuum Strength (Vacuumstrngth) - Oce CS2436 User Manual

Adjustments for Better Print Quality (CS2436-7)
7. 2. 6.
Adjustments for Better Print Quality > Adjusting the feed amount >

Adjusting the Vacuum Strength (VacuumStrngth)

When printing on heavyweight paper or paper that curls or wrinkles easily, if the Printhead rubs
against paper, adjusting the level of suction against paper on the Platen may improve results.
1.
On the Tab Selection screen of the Control Panel, press
).
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press
4.
Press
5.
Press
6.
Press
Note
If the Tab Selection screen is not displayed, press the Menu
button.
to select Paper Details, and then press the OK button.
or
or to select the type of paper, and then press the OK button.
or to select VacuumStrngth, and then press the OK button.
to select the desired setting value, and then press the OK button.
or
or to select the Paper tab (