Cannot Adjust Printhead - Oce CS2436 User Manual

Error Message (CS2436-12)
12. 1. 3.
Error Message > Error Messages >

Cannot adjust printhead.

Cause
The Printhead nozzles
are clogged.
The Printhead cannot
be aligned; highly
transparent film is
loaded.
The Printhead is
installed crooked.
Corrective Action
Execute Head Posi. Adj. again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle
Clogging (10.2.2).")
3. Clean the Printhead if the nozzles are
clogged.
(See "Cleaning the Printhead (10.2.3).")
4. Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten
Lines and Colors (Head Posi. Adj.) (7.1.2).")
Press the OK button to clear the error.
We recommend using a type of paper that you
often use, other than film, for Printhead
adjustment.
(See "Automatic Adjustment to Straighten Lines
and Colors (Head Posi. Adj.) (7.1.2).")
Straighten the Printhead as follows, and then
execute Head Posi. Adj. again.
1. Press the OK button to clear the error.
2. Use Head Inc. Adj. to adjust the angle
of inclination of the Printhead.
(See "Adjusting Line Misalignment (Head
Inc. Adj.) (7.1.4).")
3. Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten
Lines and Colors (Head Posi. Adj.) (7.1.2).")