Ricoh B051 Service Manual page 803

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSC224/DSC232
LANIER – LD024C/LD032C
RICOH – AFICIO 1224C/1232C
SAVIN – C2408/C3210
SUBJECT: IMAGE SKEW
SYMPTOM:
Image skew when feeding from mainframe Trays 1 and 2.
CAUSE:
The operator does not set the side fence flush against the paper stack.
SOLUTION:
Production Countermeasure:
The two sheets of Mylar have been added to the side fence from the September production.
For the field machines, please refer to the procedure below.
NOTE: The following field machines require the Mylar to be attached:
August 2002 production serial numbers are as follows.
J2526800001 to J2526800023
J2626800001 to J2626800042
Procedure:
1. Clean the attachment surface on the Front Side
Fence (AF016097) with alcohol.
2. Attach the Mylar (G0702735) to the Front Side
Fence as shown in the illustration.
Copyright  2003 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B051/B052 - 006
CÓPIA NÃO CONTROLADA
03/25/2003
Page 1 of 2