Ricoh B051 Service Manual page 1106

SERVICE PROGRAM MODE
Mode No.
5
(Class 1, 2, and 3)
508 004 CC Call Screening
ON/OFF
(Low Call Mode)
011 CC201 Interval
(Jam Detection:
Time Length)
012 CC101 Frequency
(Jam Detection:
Time Length)
013 CC202 Interval
(Door Open: Time
Length)
021 CC201 Beeper Ope
(Jam Operation:
Time Length)
022 CC101 Manual Call
ON/OFF
(Jam Operation:
Time Length)
023 CC202 Manual Call
ON/OFF
(Door Operation:
Time Length)
B051/B052
CÓPIA NÃO CONTROLADA
Selects the alarm mode.
[0 ∼ 1 / 0 / 1 /step]
0: Normal Mode (CC Auto Call)
1: Reduce Mode (CC Manual Call)
When selecting 1 (reduce mode), SP5-508-011 through
-023 specify parameters (referred to as "P" in the
following descriptions). Alarms occur under the following
conditions:
Continuous jam:
When paper jams occur P times consecutively, where P
can be between 2 and 10. The default for P is 5 (
508-012).
Continuous door open:
When a door is left open for P minutes, where P can be
between 3 and 30. The default for P is 10 (
013).
Unremoved jam:
When a paper jam is left unremoved for P minutes,
where P can be between 3 and 30. The default for P is
10 ( SP5-508-011).
Specifies the unremoved jam timer (
[3 ∼ 30 / 10 / 1 minute/step]
Specifies the number of consecutive jams (
004). [2 ∼ 10 / 5 / 1 time/step]
Specifies the continuous door open timer (
004). [3 ∼ 30 / 10 / 1 minute/step]
Selects how the machine handles the unremoved jam
alarm. [0 ∼ 1 / 1 / 1 /step]
0: Auto call
1: Beeper
If an unremoved jam occurs, a phone call is
automatically made when 0 (auto call) is selected. To
enable SP5-508-21 through -23, SP5-508-4 must be set
to 1.
Selects how the machine handles the consecutive jam
alarm.
[0 ∼ 1 / 1 / 1 /step]
0: Auto call
1: Manual Call
Selects how the machine handles the continuous door
open alarm.
[0 ∼ 1 / 1 / 1 /step]
0: Auto call
1: Manual Call
5-42
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
SP5-508-004).
Rev. 04/2004
SP5-
SP5-508-
SP5-508-
SP5-508-
SM