Ricoh B051 Service Manual page 1093

Rev. 04/2004
Mode No.
4
(Class 1, 2, and 3)
303 APS Minimum Size Setting
1
417 IPU Test Pattern
1 Prints test patterns from the IPU
video data outputs.
0: Scanning Image
1: Checker
2: Oblique Checker
3: Horizontal Gray Scale
4: Vertical Gray Scale
5: RGB YMCK Scale
6: UCR Gray Scale
7: Color Patch 16 Steps 1
8: Color Patch 16 Steps 2
440 Saturation Adjustment
1
540 Printer Vector
1 R:K
2 R:C
3 R:M
4 R:Y
5 Y:K
6 Y:C
7 Y:M
8 Y:Y
9 G:K
10 G:C
11 G:M
12 G:Y
13 C:K
14 C:C
15 C:M
16 C:Y
17 B:K
18 B:C
SM
CÓPIA NÃO CONTROLADA
Selects whether the copier determines that the original is
A5 size when the APS sensor cannot detect the size.
[0 ∼ 1 / 0 / 1 /step]
If "A5 lengthwise" is selected, paper sizes that cannot be
detected by the APS sensors are regarded as A5
lengthwise. If "Not detected" is selected, "Cannot detect
original size" will be displayed.
Adjusts the colour chroma for the scanner.
[0 ∼ 5 / 3 / 1 /step] DFU
Adjust the vector correction of the filter in the CCD on
the SBU unit.
[–128 ∼ 127 / 0 / 1 /step]
When replacing the SBU, input the data from the data
sheet that is included with the spare SBU unit.
5-29
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Function / [ Setting ]
9: Color Patch 64 Steps
10: Checker (YMCK)
11: Patch (YMCK)
12: Banding 1 (Gray)
13: Banding 2 (Gray)
14: Horizontal Gray Scale 2
15: Scanning Image + Checker
16: Scanning Image + Gray Scale
Change to the copy mode display by
pressing the Interrupt key, then print the
test pattern.
B051/B052