Transfer Box - Ricoh B051 Service Manual

FAX COMMUNICATION FEATURES

Transfer Box

The user can create transfer boxes in the machine's memory for forwarding
incoming fax messages. Each box must have a name and a code. Each box must
also have destinations associated with it; any message arriving in this box will
automatically be sent on to these destinations.
If a sender knows the code that was used to create a transfer box, they can specify
this as the SUB code during transmission. The message will then go to this transfer
box, and will be sent on to the transfer destinations associated with that transfer
box.
If the sender also sends a SID code, the SID code stored in the receiver must be
the same or the communication will be disconnected.
Items to program at the receiving machine
Items
SUB Code (Box number)
Box name
Password (SID)
Receiver (Final destinations)
Items for the sender to specify when setting up the transmission
Items
SUB Code (Box number)
Password (SID)
NOTE: 1) 5 destinations can be programmed with Group or Quick Dial as the
delivery destinations.
2) More than 5 destinations are available if a Group is specified as one of
the destinations.
3) If the SID does not match, the communication is disconnected.
4) A result report is not sent back to the transmitter but it is printed on the
receiving machine.
B502
CÓPIA NÃO CONTROLADA
Required
Required
Optional
Required (Quick Dial)
Required (must be the same as the code
that was used to set up the transfer box)
Optional
138
CÓPIA NÃO CONTROLADA
Note
Note
SM