Ricoh B051 Service Manual page 1164

Tech Service Bulletin No. B051/B052 – 042
IMPORTANT: While cleaning, make sure that no foreign particles come in contact with the development
roller surface and that the development unit surface is not damaged.
Clean
4. Clean out as much of the spilled toner as possible from the space between the development roller and
seal using a vacuum.
5. Attach the field countermeasure side seals (L-shaped) to both ends of the development unit as shown on
next page.
Toner Protection sheet (P/N B0519909):– 40 pcs/set. The 40 piece set will modify 10 machines (4
Development Units per machine). The L-shaped seals will be distributed automatically to locations
based upon machine shipment records.
NOTE: The Toner Protection Sheet part number (P/N B0519909) is a control number only. This part can
not be ordered using this number.
CÓPIA NÃO CONTROLADA
Clean
Spilled toner
CÓPIA NÃO CONTROLADA
Vacuum out the
toner
Page 2 of 4