Firmware History for B051/B052
Corrects the following:
⇒
•
Software modified so that process control and charge corona wire cleaning are performed
just prior to switching over to low power mode, to minimize the possibility of interrupting a
print job.
•
The ACC sheet is not printed out correctly if the machine receives a Fax while printing out
the sheet.
•
The title and accompanying pictorial symbols for all fusing unit jams are now displayed as
one "B/C Jam" message, in order to ensure panel displays are consistent with machine
decals.
Specifically:
-
The "B/C jam" display instructs users to open both the right cover and right-upper
cover.
-
The "B jam" display now instructs users to open the right cover only.
•
"Toner End" is displayed if the main power is turned On without the toner cartridge
installed, even if the cartridge is then properly installed following this (main power Off/On
necessary).
•
Machine emits a continuous beeping sound while shifting the paper stack inside the LCT
following the LCT paper end condition (auto tray switching Off).
NOTE:
In addition to this BICU version, be sure to update the main unit controller firmware
to Version 2.07.2 or later.
CÓPIA NÃO CONTROLADA
SYMPTOM CORRECTED
CÓPIA NÃO CONTROLADA
FIRMWARE
VERSION
1.333:01
Page 13 of 37