Ricoh B051 Service Manual page 1054

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSC224/DSC232
LANIER – LD024C/LD032C
RICOH – AFICIO 1224C/1232C
SAVIN – C2408/C3210
SUBJECT: CAP FOR O/B WASTE TONER
SYMPTOM:
Waste toner may sometimes leak from the service part PCU due to vibration during parts transport.
CAUSE:
Cleaning was not performed on the service part PCU following final tests on the production line (only PCU's
fitted in the mainframe were cleaned at this stage).
SOLUTIONS:
A PCU cleaning procedure was added to the production process for the service part PCU.
The procedure has been applied from: May 2003 production.
A cap has been added to the service part PCU to seal the opening between the PCU and the waste
toner bottle during shipping from August 2003 production.
NOTE 1: This cap is not necessary on mainframe PCU's since the waste toner bottle already covers this
opening . See Caution on page 2.
Copyright  2004 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B051/B052 – 034
CÓPIA NÃO CONTROLADA
01/16/2004
Page 1 of 2