Operation Panel Lcd Firmware History - Ricoh B051 Service Manual

Firmware History for B051/B052
August production serial numbers
B051-17: J2526800001 to J2526800023
B051-27: J2526800024 to J2526800043
B052-17: J2626800001 to J2626800042
B052-27: J2626800043 to J2626800061
When updating the BICU firmware for August production machines-
The BICU firmware is updated from the August production machines to version 1.204:1 or later for the first
time, be sure to update the main unit controller firmware to version1.332 or later at the same time. (Refer to
the main unit controller firmware history. Then, change the following SP modes after updating the firmware.
SP2-905-01: (Paper transfer roller type): Select 0, then press #.
SP1-905-01 (pressure roller type): Select 0, then press #.
SP2-944-4 and –5: (OPC Lubrication – High Coverage): -4: Change setting from 20 to 30. –5: Change the
setting from 40 to 60.

1.3 OPERATION PANEL LCD FIRMWARE HISTORY:

Corrects the following:
•
Thin, Normal in Spanish (US version), French (European version).
The words in the Spanish user tools (US version) and French user tools (EU version),
which had been corrected in English from first production, have been corrected as
follows: The Spanish user tools is standard for the US version, and the French user tools
is standard for the EU version as a second language.
∗
Thin → Normal
∗
Normal → Middle Thick/90 -105 g/m2
These words are located in the following screens:
User tool - Maintenance - Plain paper type
•
Clean / Adjust in Spanish, French
The indication for the Clean/Adjust key and its instruction in Spanish or French was
temporarily displayed in English until the displays for Spanish and French were available.
The new firmware contains these French and Spanish displays for user tools:
User tool - Maintenance - Clean/Adjust
•
First release for Asia version
Corrects the following:
•
Taiwanese words/phrases and fonts added.
NOTE: For Asia and Taiwan models only.
Corrects the following:
•
Incorrect indication of the Korean and Russian words/phrases in the scanner user tools
has been corrected.
•
Taiwanese words correction
•
Korean words correction
CÓPIA NÃO CONTROLADA
SYMPTOM CORRECTED
CÓPIA NÃO CONTROLADA
FIRMWARE
VERSION
1.19
1.20
1.25
Page 14 of 37