Transmission Mode; Ad Hoc Mode; Infrastructure Mode - Ricoh B051 Service Manual

IEEE802.11B (WIRELESS LAN)

4.6.3 TRANSMISSION MODE

The following transmission modes are provided for wireless communication.

Ad hoc Mode

The ad hoc mode allows communication
between each device (station) in a
simple peer-to-peer network. In this
mode, all devices must use the same
channel to communicate.
In this machine, the default transmission
mode is ad hoc mode and the default
channel is 11. First, set up the machine
in ad hoc mode and program the
necessary settings, even if the machine
will be used in the infrastructure mode.
To switch between ad hoc and
infrastructure modes, use the following
user tool: Host Interface Menu -
IEEE802.11b - Comm Mode

Infrastructure Mode

The infrastructure mode allows
communication between each computer
and the machine via an access point
equipped with an antenna and wired into
the network. This arrangement is used in
more complex topologies.
• The wireless LAN client must use the
same SSID (Service Set ID) as the
access point in order to communicate.
B463/B529
CÓPIA NÃO CONTROLADA
52
CÓPIA NÃO CONTROLADA
Rev. 05/2003
B529D907.WMF
Access Point
B529D908.WMF
SM