Ricoh B051 Service Manual page 1086

SERVICE PROGRAM MODE
Mode No.
2
(Class 1, 2, and 3)
970 Oil Removal Mode
1 Oil Removal
2 Print Interruption
3 Number of
Continuation
4 Number of Duplex
B051/B052
CÓPIA NÃO CONTROLADA
Enables/disables the settings of SP2–970–2 through 4.
[0 ~ 1 / 1 / 1 /step]
0: Disables
1: Enables
Oil on duplex copies gets on the transfer belt, and this
can cause uneven image density. To remove this oil,
printing stops, the PCU turns, and the cleaning unit
removes the oil.
Enables/disables interruption of the oil removal process.
[0 ~ 1 / 0 / 1 /step]
0: Disables
1: Enables
If interruption is enabled, the user does not need to wait until
the oil removal process ends, but the output image may be
poor.
Specifies how many times the oil removal process is
repeated.
[1 ~ 20 / 5 / 1 /step]
The more times the oil removal is repeated, the better the
output images are; but the longer it takes.
Specifies how often the oil removal process is done. The
unit is the number of duplex prints. The counter counts
down once every narrow (A4 SEF or less) duplex sheet,
and counts back up 1 for every other type of sheet.
[1 ~ 50 / 10 / 1 /step]
5-22
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
Rev. 04/2004
SM