Ricoh B051 Service Manual page 465

Communication Switch 0B
No FUNCTION
5 Action when there is no fax
number in the programmed
Quick/Speed dials which meets
the requesting terminal's own
fax number
0: Transfer is disabled
1: Transfer is enabled
6-7 Not used
Communication Switch 0C
No FUNCTION
0 Number of digits compared to
to find the requester's fax number
4 from the programmed
Quick/Speed Dials when acting
as a Transfer Station
5-7 Not used
SM
CÓPIA NÃO CONTROLADA
After the machine receives a transfer request, the
machine compares the last N digits of the
requesting terminal's own fax number with all the
Quick/Speed dials programmed in the machine. (N
is the number programmed in communication switch
0C.)
0: If there is no matching number programmed in
the machine, the machine rejects the transfer
request.
1: Even if there is no matching number programmed
in the machine, the machine accepts the transfer
request. The result report will be printed at the
transfer terminal, but will not be sent back to the
requesting terminal.
Do not change the settings.
00 - 1F (0 to 31 digits)
After the machine receives a transfer request, the
machine compares the own telephone number sent
from the Requesting Terminal with all Quick/Speed
Dials programmed in the machine, starting from
Quick Dial 01 to the end of the Speed Dials.
This number determines how many digits from the
end of the telephone numbers the machine
compares.
If it is set to 00, the machine will send the report to
the first Quick/Speed Dial that the machine
compared. If Quick Dial 01 is programmed, the
machine will send the report to Quick 01. If Quick
Dial 01 through 04 are not programmed and Quick
Dial 05 is programmed, the machine will send the
report to Quick 05.
Default setting - 05(H) = 5 digits
Do not change the settings.
75
CÓPIA NÃO CONTROLADA
BIT SWITCHES
SP No. 1-104-012
COMMENTS
SP No. 1-104-013
COMMENTS
B502