Checking The Connections; File Format Converter Installation (B519); Accessory Check - Ricoh B051 Service Manual

FILE FORMAT CONVERTER INSTALLATION (B519)

1.3.4 CHECKING THE CONNECTIONS

1. Plug in the power cord and turn on the main switch.
2. Enter the printer user mode and print the configuration page.
(User Tools/ Printer Settings/ List Test Print/ Config. Page)
The same data can also be printed using the printer service mode.
("Print Summary": SP1-004)
All installed options are listed in the "System Reference" column.
⇒
1.4 FILE FORMAT CONVERTER INSTALLATION (B519)

1.4.1 ACCESSORY CHECK

Check the accessories in the box against the following list:
No.
1 File Format Converter Board
2 Operating Instructions
3 Screw – M3x6
1.5 INSTALLATION PROCEDURE
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: 1)
To install this option, the printer/scanner option (B529) and memory option (G331 or
G332) must be installed first (
2)
The wireless LAN board, the IEEE1394 interface board, and this option cannot be
installed in the same machine. If the wireless LAN board or IEEE1394 interface board
has been installed, remove it.
3)
The file format converter is available for the following software versions or later.
Controller
Fax
Printer
NFA (Net File)
Scanner
DeskTop Binder V2
B463/B529
CÓPIA NÃO CONTROLADA
Description
Software
2.00.1
2.00
2.00
1.66.00
2.00
3.0.0.0
CÓPIA NÃO CONTROLADA
Q'ty
1
1
2
1.2).
Version
10
Rev. 5/2003
Note
Service Card Version
Controller ver. 2.001
BICU-Fax ver. 1.07
Printer ver. 2.00
S2.00_PS1.06
----
SM