Firmware History for B051/B052
Corrects the following:
•
Paper may not be fed with a certain application, by-pass feed, and N-job ON after a jam
or paper end condition occurs and a jam or paper end condition is cleared.
•
SC819 is indicated after a copy job is finished with 'Store file' then, printing 'Stored file'.
Corrects the following:
•
Wireless LAN card may not communicate with the printer when the WEP key is ON.
Corrects the following:
•
Wireless LAN card may not communicate with the printer when the WEP key is ON.
Corrects the following:
•
Minor bug correction.
Corrects the following:
•
Supports Media Link Board function
•
SP mode newly added: SP2-801-03 (Additional Value of the charge corona cleaning
interval). Refer to BICU firmware history.
Corrects the following:
•
Specification change:
The counter specifications have been changed as described in PUB(C) – 047.
•
Media Link Board minor bug correction.
Default DHCP: OFF
Default Autonet: ON
•
See Symptom Corrected for V2.01.4.
Corrects the following:
•
GSA version model names #12-15 (NA only) have been added to SP5-907-1 (Plug &
Play).
•
The following defaults have been returned to their values as mentioned in v1.252, as they
were reversed due to a programming error in v2.00.1:
Default DHCP: ON
Default Autonet: OFF
•
Machine may stall when the memory full condition is reached while storing an image into
memory if the MLB is not installed.
Corrects the following:
•
Modified in accordance with the BICU version 1.253:01 modification.
•
In addition to this main unit controller version, be sure to update the BICU firmware to
V1.253 :01 or later. For details, please see TSB #B051/B052-021R (black faint images).
Corrects the following:
•
SC819 when printing out the Scanner History List. (for China, Taiwan, and Russia only)
•
Some Korean characters appear garbled on the SMC report.
CÓPIA NÃO CONTROLADA
SYMPTOM CORRECTED
CÓPIA NÃO CONTROLADA
FIRMWARE
VERSION
V1.33
V1.332
V1.332
V1.39
V2.00.1
V2.01.2
V2.01.4
V2.01.5
V2.02
Page 20 of 37