Tech Service Bulletin No. B051/B052 – 043
2. When removing or installing the PCU after having removed or installed the left inner cover, make sure
that the projections shown below are underneath the cover (not sticking out).
•
If these projections are left exposed, they can damage the OPC surface when the PCU is installed
or removed.
Plastic Projections
3. When removing the charge corona unit, be sure to keep the unit level while gently pulling it out (i.e. do
not lower or turn the unit at all).
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Page 2 of 2