Ricoh B051 Service Manual page 878

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSC224/DSC324
LANIER – LD024C/LD032C
RICOH – AFICIO 1224C/1232C
SAVIN – C2408/C3210
SUBJECT: BLANK AREA ON ONE SIDE OF DEVELOPMENT UNIT
SYMPTOM:
A blank area may appear on one side of the image (development unit front or rear). The blank area may
only occur with one color.
CAUSE:
The development unit front gears engage their mainframe counterparts slightly out of alignment from the rear
gears.
SOLUTION:
Rotate the mainframe gears manually if the development unit is not easily removed. Remove the
development unit(s) on which the symptom occurs. Then reinstall the unit (s). Be sure the development
unit(s) is inserted evenly from front to rear of the machine and is locked behind the tabs on the Front and
Rear Side Plates.
Copyright     2003 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B051/B052 – 015
Mainframe Gears
CÓPIA NÃO CONTROLADA
04/25/2003
Page 1 of 1