Ricoh B051 Service Manual page 937

Tech Service Bulletin No. B051/B052 - 018
NEW SP MODES:
The following SP modes have been added (5852-3 to 5853-13) to enable SMTP authentication. Please also
see the procedure below on enabling SMTP authentication on machines produced up until January 2003.
SP Number/Name
5852 SMTP/POP
001 SMTP Server Name
002 SMTP Port Number
003 Authorization
5852
004 User Name
005 Password
006 SMTP Auth. Encryption
007 POP before SMTP
008 POP Server Name
009 POP Port Number
010 POP User Name
011 POP Password
012 POP Auth. Encryption
013 Time out Setting for POP
CÓPIA NÃO CONTROLADA
Input the IP address or host name of the SMTP server. Use
up to 127 alphanumeric characters.
Input the port number used when sending e-mail to the
SMTP server.
[1~65535 / 25 / 1]
Validates the SMTP function. SMTP (Simple Mail Transfer
Protocol) is the protocol for communication between Internet
main MTAs (Message Transfer Agents).
[0~1 / 0 / 1]
0: OFF: Disables SMTP
1: ON: Enables SMTP
Sets the SMTP user name.
Sets the SMTP password.
Sets encryption method for the transfer password in SMTP
validation.
[0~2 / 0 / 1]
0: Auto: Allows three methods for encryption in SMTP
validation: LOGIN, PLAIN, or CRAM-MD5.
1: OFF: Allows two methods for SMTP validation: LOGIN,
PLAIN.
2: ON: Allows only one method for SMTP validation: CRAM-
MD5.
A flag that determines whether the POP server is connected
before connecting to the SMTP server.
[0~1 / 0 / 1]
POP
0: OFF
1: ON
Post Office Protocol (POP) servers are computers that receive
mail using SMTP. The mail includes a setting to ensure that it is
directed to the POP server. POP servers are used when the user
is not permanently connected to the Internet.
Sets the POP server name.
Enter up to 127 alphanumeric characters.
Sets the POP port number.
[1 65535 / 110 / 1]
Sets the POP user name.
Enter up to 63 alphanumeric characters.
Sets the POP password.
Enter up to 63 alphanumeric characters.
Sets the encryption method for the password when SP5852-007
(POP Before SMTP) is in use.
[0~2 / 0 / 1]
0: Auto: Allows two methods for encryption: APOP and normal
encryption to match the settings of the POP server.
1: OFF: Allows only normal encryption.
2: ON: Allows only APOP encryption.
Sets the wait time after POP validation until the SMTP mail is
sent.
[0~10000/ 300 /1 ms]
CÓPIA NÃO CONTROLADA
Function/[Setting]
Page 2 of 3