Ricoh B051 Service Manual page 1092

SERVICE PROGRAM MODE
SP4-XXX: (Scanner)
Mode No.
4
(Class 1, 2, and 3)
008* Scanner Sub Scan Magnification
1 Scanner Sub Scan
Magnification
010 Scanner Leading Edge Registration
1 Scanner Leading Edge
Registration
011* Scanner Side-to-side Registration
1 Scanner Side-to-side
Registration
012* Scanner Blank Margin
1 Leading Edge
2 Trailing Edge
3 Left
4 Right
013 Scanner Free Run
1 Lamp: OFF
2 Lamp: ON
017 Scan
1 Shading ON
2 Shading OFF
205 Black ADS Level
1 Black ADS Level
301 APS Data Confirmation
1 APS Data
Confirmation
B051/B052
CÓPIA NÃO CONTROLADA
Adjusts the magnification in the sub scan direction for
scanning.
[0.0 ~ 1.0 / 0.0 / 0.1 %/step]
Use the key to toggle between + and – before
entering the value. The specification is
"Replacement and Adjustment – Copy Adjustment" for
details.
Adjusts the leading edge registration for scanning in
platen mode.
[–3.0 ~ 3.0 / 0.0 / 0.1 mm/step]
(–): The image moves in the direction of the leading
edge.
Use the key to toggle between + and – before
entering the value. The specification is 2
"Replacement and Adjustment – Copy Adjustment" for
details.
Adjusts the side-to-side registration for scanning in
platen mode.
[–6.0 ~ +6.0 / 0.0 / 0.1 mm step]
(–): The image disappears at the left side.
(+): The image appears.
Use the key to toggle between + and – before
entering the value. The specification is 2
"Replacement and Adjustment – Copy Adjustment" for
details.
Adjusts the erase margin at each side for scanning.
[0.0 ~ 3.0 / 0.0 / 0.1 mm/step]
Do not adjust this unless the user wishes to have a
scanner margin that is greater than the printer margin.
Performs a scanner free run with the exposure lamp on
or off.
Press ON on the touch panel to start this feature. Press
OFF on the touch panel to stop.
Performs a scanner free run with shading on or off. Only
one scan is made.
Press ON on the touch panel to start this feature. Press
OFF on the touch panel to stop.
Adjusts the erased background level for black-&-white
ADS.
[0 ∼ 128 / 64 / 1 /step]
Displays the status of the APS sensors and platen/DF
cover sensor.
5-28
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
±
Rev. 04/2004
1%. See
±
1.5 mm. See
±
1.5 mm. See
SM