Ncs (Nib) Firmware History - Ricoh B051 Service Manual

Firmware History for B051/B052

5.2 NCS (NIB) FIRMWARE HISTORY:

Initial Production Release
Corrects the following:
•
Changed default setting of "diprint" to Enabled.
Corrects the following:
•
Supports the new IC chip on the new wireless LAN option (old chip discontinued)
•
TCP ports can be opened/closed.
NOTE: After disabling HTTP, it is not possible to access the target device through web
browser. To change the setting, please use telnet to open HTTP. When the telnet
port is disabled, it is necessary to clear the network settings (Memory Clear for
NCS) to open the port.
•
Changed default setting of Autonet to OFF
•
Changed default setting of DHCP to ON.
Corrects the following:
•
When TCP/IP is disabled as the Effective Protocol in UP mode, the program version and
NCS number will not be displayed in SP mode or on the SMC list
•
The following functions are added for SMTP E-mail transmission:
SMTP Authentication
POP before SMTP
Corrects the following:
•
Default for DHCP changed to: ON.
•
Default for Autonet changed to: OFF.
•
Communication between the LAN card and printer in 802.11adhoc mode is sometimes
terminated when the condition of the EM waves remains constant.
Corrects the following:
•
SC819 occurs after continuously receiving damaged packets from NetBEUI
Corrects the following:
•
The printer is unable to access the target local Netware server.
•
The printer is unable to log on to the Netware server even when the Netware Server SAP
setting is unchecked.
CÓPIA NÃO CONTROLADA
SYMPTOM CORRECTED
CÓPIA NÃO CONTROLADA
FIRMWARE
VERSION
3.53
3.54
3.55
3.70
3.72
3.73
3.74
Page 32 of 37