SERVICE PROGRAM MODE
SP6-XXX: (Peripherals)
Mode No.
6
(Class 1, 2, and 3)
006*
ADF Adjustment
1
S-to-S Registration
Leading Edge
2
Registration
3
Trailing Edge Erase
4
S-to-S Registration
(Rear)
5
Sub-san
Magnification
6
Orig. Buckling
7
Buckle Adjustment
007
DF Input Check
1
Original Set
2
Original Width 1
3
Original Width 2
4
Original Length 1
5
Original Length 2
6
Orig. Trailing Edge
7
Cover Open
8
DF Position
9
Registration
10
Original Exit
11
Original Reverse
008
DF Output Check
1
Feed Motor
(Forward)
2
Feed Motor
(Reverse)
Trans. Motor
3
(Forward)
4
Feed Clutch
5
Pick-up Solenoid
Junction Gate
6
Solenoid
7
Stamp Solenoid
B051/B052
CÓPIA NÃO CONTROLADA
Adjusts the side-to-side registration of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
The main scan registration of the ADF cannot be adjusted.
Adjust the copier registration if necessary.
Adjusts the sub-scan registration of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
Adjusts the trail edge erase of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
Adjusts the rear-side side-to-side registration of the optional
ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
The main scan registration of the ADF cannot be adjusted.
Adjust the copier registration if necessary.
Adjusts the sub-scan magnification of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 %/step]
Enables/disables original buckling during rear side scanning.
Disable if the customer is scanning fragile originals.
[0 ∼ 1 / 1 / 1 /step]
• 0: Disabled
• 1: Enabled
Adjusts original buckling for rear side scanning.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
Displays the signals received from sensors and switches of the
ARDF.
See section 5.1.4
Do not check another item before the result is returned.
Switches on each electrical component of the ARDF for testing.
See section 5.1.5
Do not start to check another item before ending the test that is
in progress.
5-50
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
Rev. 05/2003
SM