Shading Correction; Scan Line Correction - Ricoh B051 Service Manual

IMAGE PROCESSING
6.6.3 IMAGE PROCESSING
SBU

• Shading correction

• Picture element correction
• Scanner line correction
• Scanner gamma correction
• Filters
• ADS ASIC 1
• Image Separation
• ACS
ASIC 3
Shading Correction
Auto shading compensates for the possible differences in the light emission level at
the edge and center of a scanned image caused by the scanner lens, or the
differences among the CCD pixels.
Picture Element (Dot Position) Correction
Picture element correction includes
1) the completion of the scan line correction process
2) the correction of the time when the CCD is not perpendicular to the light
• The green CCD line is taken as the standard.
• Both ends of the red and blue lines are adjusted to match the standard.
NOTE: To adjust the vertical line correction level, use SP4-932.

Scan Line Correction

R, G, and B CCD lines are spaced 4 scan lines apart (8 lines total) when 100%
magnification is used.
• Scan line correction synchronizes these signals by storing each line in memory.
• The difference between the R, G and B signals depends on the magnification
ratio.
• If this calculation does not result in an integer, the corrected data is set to the
closest integer, but further correction is needed (! "Picture Element
Correction").
B051/B052
CÓPIA NÃO CONTROLADA
• Color conversion
• Main scan magnification
• Printer gamma correction
• Error diffusion
ASIC 2
• Gradation processing
ASIC 4
6-26
CÓPIA NÃO CONTROLADA
• Image rotation
• Image sort
Controller
LD Unit
BICU
HDD
B051D552.WMF
SM