Ricoh B051 Service Manual page 459

Printer Switch 0E
No FUNCTION
0 Paper size selection priority
0: Width
1: Length
1 Paper size selected for
printing A4 width fax data
0: 8.5" x 11" size
1: A4 size
2 Page separation
0: Enabled
1: Disabled
3 Printing the sample image on
to reports
4 Bit 4 Bit 3 Setting
0 0 The upper half
only
0 1 50% reduction
in sub-scan only
1 0 Same size
1 1 Not used
5-6 Not used
7
Equalizing the reduction ratio
among separated pages
(Page Separation)
0: Enabled
1: Disabled
SM
CÓPIA NÃO CONTROLADA
0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to print all
the received lines without reduction is selected first.
This switch determines which paper size is selected
for printing A4 width fax data, when the machine has
both A4 and 8.5" x 11" size paper.
1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette, the
machine automatically prints the fax message.
"Same size" means the sample image is printed at
100%, even if page separation occurs.
User Parameter Switch 19 (13H) bit 4 must be set to
"0" to enable this switch.
Refer to Detailed Section Descriptions for more on
this feature.
Do not change the settings.
0: When page separation has taken place, all the
pages are reduced with the same reduction ratio.
1: Only the last page is reduced to fit the selected
paper size when page separation has taken place.
Other pages are printed without reduction.
69
CÓPIA NÃO CONTROLADA
BIT SWITCHES
SP No. 1-103-015
COMMENTS
B502