Ricoh B051 Service Manual page 799

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSC224/DSC232
LANIER – LD024C/LD032C
RICOH – AFICIO 1224C/1232C
SAVIN – C2408/C3210
SUBJECT: BYPASS AND DUPLEX REGISTRATION MAY BE OFF
SYMPTOM:
Registration may be incorrect on the Bypass and Duplex units.
CAUSE:
Some machines were not adjusted at the factory and may need to be adjusted to meet specifications.
FIELD COUNTERMEASURE:
For units with the serial number range listed below, test the Duplex and Bypass units, and perform the
following adjustments at installation. If adjustments are necessary for the Bypass unit, use SP 1- 001 #
9,10,11; SP 1 –002 # 1 and SP 1 – 003 # 5,6,7. If adjustments are necessary for the Duplex unit, use SP 1-
001 # 12; SP 1-002 # 6, SP 1-003 #8. See B051/B052 Service Manual pages 5-4 and 5-5 for descriptions of
the above SP Modes.
The following Serial Numbers may need to have the above adjustments performed:
B051: : J2527100693 - J2527200778 (1141 units)
B052: : J2627100047 - J2627200946 (1456 units)
PRODUCTION COUNTERMEASURE:
All units starting in February 2003 production with serial numbers listed below have been adjusted by the
factory:
B051: : J25361xxxxx
B052: : J26361xxxxx

Copyright 2003 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B051/B052 – 003
CÓPIA NÃO CONTROLADA
03/21/2003
Page 1 of 1