Confirmations Upon Delivery; Checks; Nameplate Information - Omron SYSDRIVE 3G3RV Series User Manual

Confirmations upon Delivery

K K K K

Checks

Check the following items as soon as the Inverter is delivered.
Item
Has the correct model of Inverter been
delivered?
Is the Inverter damaged in any way?
Are any screws or other components
loose?
If you find any irregularities in the above items, contact the dealer from which you purchased the Inverter or
your OMRON representative immediately.
K K K K

Nameplate Information

There is a nameplate attached to the side of each Inverter. The nameplate shows the model number, specifica-
tions, lot number, serial number, and other information on the Inverter.
n Example Nameplate
The following nameplate is an example for an Asian-model Inverter: 3-phase, 200 VAC, 37 kW, IEC IP00
standards.
Inverter model
Input specifications
Output specifications
Lot number
Serial number
Table 1.5 Checks
Check the model number on the nameplate on the side of the Inverter.
Inspect the entire exterior of the Inverter to see if there are any scratches or
other damage resulting from shipping.
Use a screwdriver or other tools to check for tightness.
3G3RV B2370
AC3PH 200 220V 50Hz
INPUT
AC3PH 200 230V 60Hz
OUTPUT AC3PH 0 230V 0 400Hz
LOT NO
SER NO
OMRON Corporation OMRON
Fig 1.1 Nameplate

Confirmations upon Delivery

Method
160A
145A 55kVA
Mass
MASS 57kg
PRG
MADE IN JAPAN
M S
7
1-