Omron SYSDRIVE 3G3RV Series User Manual page 316

nData Created by Protocol Support Tool and CX-Protocol
# RTQLGEV HKNG KU WUGF D[ VJG 2TQVQEQN 5WRRQTV 6QQN VQ ETGCVG CPF EQPVTQN FCVC # RTQLGEV
HKNG EQPUKUVU QH VJG HQNNQYKPI FCVC
Single project file
The standard system protocol incorporated by the Communications Board cannot be edited or transferred. To make use of
the standard system protocol, copy it to the project file and edit it.
Under Creating a Project File, an example to create a new project file is shown without making use of the standard system
protocol.
-100
6
Protocol list Protocol name
Protocol name
Protocol name
Trace list
PC
Protocol name Sequence 000/Sequence name
(Single protocol) Sequence 001/Sequence name
Sequence 999/Sequence name
Send message list
Recv message list
Recv matrix
Sequence
Fig 6.65 Project File Configuration
A maximum of 20 protocols
(A maximum of 1,000 sequences per project)
A maximum of 60 sequences/protocol
The first sequence number and last sequence number
are specified by each protocol.
Message name
Message name
A maximum of 300 messages
Message name
Message name
Matrix name
A maximum of 100 matrixes
Matrix name
Step 00
Step 01
A maximum of 16 steps
Step 15