Omron SYSDRIVE 3G3RV Series User Manual page 203

Name
Param-
Description
LCD
eter
Number
Display
Software
No. (flash
U1-14 (Manufacturer's ID number) (Cannot be output.)
memory)
FLASH ID
Terminal
Monitors the input voltage of
A1 input
the voltage frequency refer-
voltage
U1-15
ence. An input of 10 V cor-
Term A1
responds to 100%.
Level
Terminal
Monitors the input voltage of
A2 input
the multi-function analog
voltage
U1-16 input.
An input of 10 V corre-
Term A2
sponds to 100%.
Level
Motor sec- Monitors the calculated
ondary cur- value of the motor secondary
rent (Iq) current.
U1-18
The motor rated secondary
Mot SEC
current corresponds to
Current
100%.
Motor excit- Monitors the calculated
ing current value of the motor excitation
(Id) current.
U1-19 The motor rated secondary
current corresponds to
Mot EXC
100%.
Current
Output fre- Monitors the output fre-
quency after quency after a soft start.
soft-start The frequency given does
U1-20
not include compensations,
such as slip compensation.
SFS Output
The unit is set in o1-03.
ASR input Monitors the input to the
speed control loop.
U1-21
The maximum frequency
ASR Input
corresponds to 100%.
ASR output Monitors the output from the
speed control loop.
U1-22 The motor rated secondary
ASR Output
current corresponds to
100%.
PID feed- Monitors the feedback value
back value when PID control is used.
U1-24 The input for the max. fre-
PID Feed-
quency corresponds to
back
100%.
Output volt-
Monitors the Inverter inter-
age refer-
nal voltage reference for
ence (Vq)
U1-26
motor secondary current
Voltage Ref
control.
(Vq)
Output Signal Level Dur-
Min.
ing Multi-Function Analog
Unit
Output
10 V: 100% (10 V)
0.1%
(0 to ± 10 V possible)
10 V: 100% (10 V)
0.1%
(0 to ±10 V possible)
10 V:Motor rated
secondary current) 0.1%
(0 to ±10 V output)
10 V:Motor rated
secondary current) 0.1%
(0 to ±10 V output)
10 V: Max. frequency 0.01
(0 to ± 10 V possible) Hz
10 V: Max. frequency 0.01
(0 to ± 10 V possible)
10 V:Motor rated
secondary current) 0.01
(0 to ± 10 V possible)
10 V: Max. frequency 0.01
(0 to ± 10 V possible)
10 V: 200 VAC (400 VAC) 0.1
(0 to ± 10 V possible)
Parameter Tables
Control Methods
V/f
Open
Register
Loop
V/f with
Vec-
PG
tor
- A A A 4DH
A A A 4EH
A A A 4FH
A A A 51H
No No A 52H
A A A 53H
No A No 54H
%
No A No 55H
%
A A A 57H
%
No No A 59H
V
77
5-