Omron SYSDRIVE 3G3RV Series User Manual page 96

There are indicators on the upper left of the RUN and STOP Keys on the Digital Operator. These indicators
will light and flash to indicate operating status.
The RUN Key indicator will flash and the STOP Key indicator will light during initial excitation of the
dynamic brake. The relationship between the indicators on the RUN and STOP Keys and the Inverter status is
shown in the Fig 3.2.
FWD
REV
RESET
RUN STOP
Inverter output frequency
RUN
STOP
STOP
Frequency setting
RUN
STOP
Lit Blinking Not lit
Fig 3.2 RUN and STOP Indicators
-4
3