Confirmations upon Delivery
Checks
Check the following items as soon as the Inverter is delivered.
1
Has the correct model of Inverter been
delivered?
Is the Inverter damaged in any way?
Are any screws or other components
loose?
If you find any irregularities in the above items, contact the agency from which you purchased the Inverter or
your OYMC representative immediately.
Nameplate Information
There is a nameplate attached to the side of each Inverter. The nameplate shows the model number, specifica-
tions, lot number, serial number, and other information on the Inverter.
Example Nameplate
The following nameplate is an example for a standard domestic European Inverter: 3-phase, 400 VAC,
0.55 kW, IEC IP20 and NEMA 1 standards
Inverter model
Input specifications
Output specifications
Lot number
Serial number
4
1-
Item
Check the model number on the nameplate on the side of the Inverter.
Inspect the entire exterior of the Inverter to see if there are any scratches or
other damage resulting from shipping.
Use a screwdriver or other tools to check for tightness.
MODEL: CIMR-F7Z40P4
OUTPUT: AC3PH 0-480V 0-400Hz
Fig 1.1 Nameplate
Method
1.8A 1.4kVA
Inverter
specifications
Mass