User Settings; System Settings - Konica Minolta bizhub C353 Service Manual

8. Utility Mode
8.5

User Settings

8.5.1

System Settings

A. Language Selection
Functions • To select the language on the LCD display.
Use • To change the language on the control panel to another language.
Setting/ • The language options depend on the marketing area selected in [Marketing Area]
Procedure available from [System 1] under Service Mode.
B. Measurement Unit Settings
Functions • To select the unit displayed on the LCD display.
Use • To change the unit displayed on the control panel.
Setting/ • The default setting varies depending on the marketing area.
Procedure
mm (Numerical Value)
C. Paper Tray Settings
(1) Auto Tray Selection Settings
Functions • To set the tray for automatic selection when APS is being set.
• To establish the priority for switching the Tray when ATS is being set.
Use • To specify the tray to be used when APS is being set.
• To establish the priority of the Tray when ATS is being set.
Setting/ • Select the tray on the [Auto Tray Select] screen.
Procedure • Set the priority on the [Tray Priority] screen.
(2) Auto Tray Switch ON/OFF
Functions • To set whether to automatically switch to another tray with same size paper when the
paper feed tray runs out of paper during printing.
Use • To switch the paper feed tray automatically.
Setting/ • The default setting is Restrict.
Procedure
(3) No Matching Paper in Tray Setting
Functions • To set whether to switch to another tray automatically when the specified tray runs
out of paper during printing.
Use
Stop Printing (Tray Fixed) : It stops printing when the specified tray runs out of
Switch Trays (Tray Priority): To switch to another tray with the specified paper and
Setting/ • The default setting is Stop Printing (Tray Fixed).
Procedure
"Stop Printing (Tray Fixed)"
208
inch (Numerical Value)
Allow
paper.
print when the tray is out of paper
Field Service Ver. 3.0 Jan. 2008
inch (Fraction)
"Restrict"
Switch Trays (Tray Priority)