Konica Minolta bizhub C353 Service Manual page 947

3. Other
B. Adjustment of lever installation position
[2]
[2]
54
[1]
9J08F2C029DB
[1]
0 ~ +3 mm
9J08F2C030DA
Field Service Ver. 3.0 Jan. 2008
1. Install all components excepting for
elevator motor assy.
NOTE
• Fit the hole of the elevator mount-
ing plate (front/back) [1] and the
hole of the elevator tray [2], and
install them by fixing the front and
back along.
2. Fit the blocked plate [1] as shown in
the illustration, and install the lever
[2].
Specifications: 0 to +3 mm
3. Install the elevator motor assy.