7. Mechanical adjustment
7.4
Original Tray Width
NOTE
Make this adjustment after any of the following procedures has been performed.
• When the document width detection variable resistor has been replaced.
• When the EEPROM has been replaced.
1. Call the Service Mode to the screen.
See P.338 of the main body service manual.
2. Touch [ADF].
3. Touch [Original Tray Width].
[1]
44
4. Widen the width across the edge
A01HF3C001DA
Field Service Ver. 2.0 Jan. 2008
guides [1] by sliding them to the "A3"
position.
A01HF3E525DA