Ftp Setting - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 3.0 Jan. 2008
D. Proxy Authentication
Functions • To set the login name or password when authentication is necessary for accessing
the proxy server.
Use • To use when authentication is necessary for accessing the proxy server.
Setting/ <Authentication>
Procedure • The default setting is OFF.
<Log-in Name>
• Enter the login name (up to 32 one-byte characters) on the on-screen keyboard.
<Password>
• Enter the password (up to 32 one-byte characters) on the on-screen keyboard.
E. Connection Time-Out
Functions • To set the time for the timeout for accessing the server.
Use • To use when changing the time for the timeout for accessing the server.
Setting/ • The default setting is 60 sec.
Procedure
10.17.3

FTP Setting

• It will be displayed only when [Internet ISW Set] is set to "ON".
A. Data Input Setting
Functions • To set whether or not to enable downloading using FTP protocol.
Use • To use when accessing the server with FTP protocol.
• Setting this to "ON" will enable the proxy server setting.
Setting/ • The default setting is ON.
Procedure
B. Connect Proxy
Functions • To set whether or not to access the server via proxy server.
Use • To use when accessing the server via proxy server.
Setting/ • The default setting is OFF.
Procedure
C. Proxy Server
Functions • To set the address and the port No. of the proxy server.
Use • To use when accessing the server via proxy server.
Setting/ <Server Address>
Procedure • Enter an address using IPv4, IPv6, or FQDN format.
<Port Number>
• Enter the value between 1 and 65535 using the 10-key pad.
ON
30 to 300 sec.
"ON"
ON
10. Service Mode
"OFF"
OFF
"OFF"
433