Konica Minolta bizhub C353 Service Manual page 97

5. Firmware upgrade
3. Mount the compact flash on the PC, and check the drive name, which was recognized
in the Windows. (F-drive in the following figure)
4. Click [Start] → [Program] → [Accessories] → [Command Prompt] to open the com-
mand prompt.
5. Use the command prompt to move into the uncompressed directory.
6. Specify the drive of compact flash, which was recognized through the procedure 3, and
execute the "mksf.bat." (Input the C: \bizhub\card_work>mkcf ## f (drive number): in the
below figure, and push the "Enter".)
NOTE
• For ## within the above mkcf command, type two characters that correspond to
the machine model on which firmware upgrading is made.
Take a look at the following list to find right characters for a correct command.
Model and command list
bizhub C353
bizhub C253
bizhub C203
7. Once the "mkcf.bat" is executed, data writing into the compact flash is started.
52
t1
t2
t25
Field Service Ver. 3.0 Jan. 2008
A02EF2E531DA
4036fs2623e0