Konica Minolta bizhub C353 Service Manual page 350

Field Service Ver. 3.0 Jan. 2008
(3) Footer Position
Functions • To set whether to print the footer when transmitting fax.
Use • To print the footer when transmitting fax.
Setting/ • The default setting is OFF.
Procedure
NOTE
• [Outside Body Text] cannot be selected for the color mode of Internet Fax/IP
Address Fax.
C. Line Parameter Setting
(1) Dialing Method
Functions • To set the dialing method.
Use • To change the dialing method.
• The displays are different depending on the country.
Setting/ • The default setting is PB.
Procedure
NOTE
• The displays are different depending on the country.
(2) Receive Mode
• It will not be displayed when the following setting shows that management device 2 is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions • To set the fax reception mode.
Use • To change to manual reception when using the remote reception function, etc. when
connected to the external telephone.
Setting/ • The default setting is Auto RX.
Procedure
(3) Number of RX Call Rings
Functions • To set the number of times to receive call rings.
Use • To change the number of times of the fake ringback tone after it starts calling until it
starts receiving.
Setting/ • The default setting is 2 X.
Procedure
Inside Body Text Outside Body Text
"PB"
"Auto RX"
10 pps
Manual RX
"2 X" (0 to 15)
8. Utility Mode
"OFF"
305