Konica Minolta bizhub C353 Service Manual page 307

8. Utility Mode
(7) Number of User Counters Assigned
• It will not be displayed when the following setting shows that management device 2 is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions • To set the number available to be assigned for the user registration and account reg-
istration.
Use • To change the number available to be assigned for the user registration and account
registration.
Setting/ • The default setting is 500.
Procedure • The total number to be registered for the user authentication and account track is
1000. The number for the user registration will be set.
When setting the [# of Counters Assigned for Users] to 50, the number available for
Account Track will be 950.
NOTE
• The setting is available only when carrying out the user authentication and
account track.
(8) Ticket Hold Time Setting
Functions • Specify the desired length of holding time of Kerberos authentication ticket.
Use
NOTE
• This setting takes effect only when the authentication server type is set to
active directory.
Setting/ • The default settings is 60 min.
Procedure
(9) Scanner Settings
• It will be displayed only when the optional image controller IC-409 is mounted and user
authentication or account track has been set.
Functions • To select whether to use TWAIN scan function available in Fiery Remote Scan when
user authentication or account track is set to on.
Use • When user authentication or account track is set to on, select the use of TWAIN scan
function available in Fiery Remote Scan software that is supplied with the image con-
troller.
Setting/ • The default settings is Restrict.
Procedure
262
1 to 60 min.
Allow
Field Service Ver. 3.0 Jan. 2008
"Restrict"