Konica Minolta bizhub C353 Service Manual page 375

8. Utility Mode
G. Function Management Setting
(1) Each Function Setting
• It will be displayed only when the following setting shows that Vendor 2 or Management
Device is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions • To set whether to use management function for each item of [Copy], [PC print], [Send
data] and [Print others].
[Print others] is not displayed when vendor is connected.
• [ON] for [Send Data] will not be displayed when the optional image controller (IC-409)
is mounted.
Use • To set whether to use Management function for each item of [Copy], [PC print], [Send
data] and [Print others].
[Print others] is not displayed when Vendor is connected.
Setting/ • The default setting is ON.
Procedure
(2) Max Copy Set
• It will be displayed only when the following setting shows that vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions
• To set the upper limit of the number of copy or PC print when management function
has been set.
Use
Setting/ • The default setting is 999.
Procedure
(3) Network Function Settings
Functions • To set whether to use network function or not when management function has been
set.
Use • Not to use the network function whose counter is difficult to be managed when man-
agement function has been set.
• The following are target functions.
PC-FAX transmission/Using the HDD TWAIN driver to view and retrieve documents
in user boxes/Using PageScope Box Operator to view and retrieve documents in user
boxes/Using PageScope Scan Direct to retrieve documents in user boxes/Using Pag-
eScope Job Spooler to view and retrieve documents in user boxes/Box operations
using the PageScope Web Connection
Setting/ • The default setting is ON.
Procedure
NOTE
• However, when the vendor or management device setting in the Service Mode
is set, this setting is set to OFF.
Exercise caution since it will stay in "OFF" setting even when "unset" is
selected on vendor or management device setting in Service Mode later.
330
"ON" OFF
1 to "999"
"ON"
Field Service Ver. 3.0 Jan. 2008
Prohibit
OFF