Konica Minolta bizhub C353 Service Manual page 270

Field Service Ver. 3.0 Jan. 2008
(2) Symbol Set
Functions • To set the font symbol set when not specified by the printer driver during PC printing.
Use • To use when the font symbol set cannot be specified by the printer driver during print-
ing from Windows DOS, etc.
Setting/
• The default setting is Roman-8 or PC8, Code Page 437.
Procedure
(3) Font Size
Functions • To set the font size when not specified by the printer driver during PC printing.
Use • To set the font size when it cannot be specified by the printer driver during printing
from Windows DOS, etc.
• To set scalable font (: Point) and bitmap font (: Pitch) respectively.
Setting/ • The default setting is
Procedure Scalable Font : 12.00 points
Bitmap Font
(4) Line/Page
Functions • To set the number of lines per page for printing the text data.
Use • To change the number of lines per page for printing the text data.
Setting/ • Default setting value differs depending on the values by the following two different
Procedure settings.
[Utility] → [User Setting] → [Printer Setting] → [Basic Setting] → [Original Direction]
[Utility] → [User Setting] → [Printer Setting] → [Paper Setting] → [Default Paper Size]
(5) CR/LF Mapping
Functions • To set the mode for replacing data when printing the text data.
Use • To change the mode for replacing data when printing the text data.
Mode 1 : CR → CR-LF LF=LF FF=FF
Mode 2 : CR=CR LF→CR-LF FF→CR-FF
Mode 3 : CR→CR-LF LF→CR-LF FF→CR-FF
OFF
Setting/ • The default setting is OFF.
Procedure
D. PS Setting
(1) Print PS Errors
Functions • To set whether to print or not the error information when an error occurred during PS
rasterizing.
Use • To print the information concerning the postscript error.
Setting/ • The default setting is OFF.
Procedure
: 10.00 pitch
"60 or 64 lines" (5 to 128)
: Does not replace
Mode 1 Mode 2
ON
8. Utility Mode
Mode 3 "OFF"
"OFF"
225