Scan/Fax Settings - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 3.0 Jan. 2008
L. Select Tray for Insert Sheet
• It will be displayed only when the following setting is set to "Level 1" or "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
Functions
• To select the default setting of the tray for cover sheet paper.
Use
Setting/
• The default setting is Tray 2.
Procedure
M. Print Jobs During Copy Operation
• It will be displayed only when the following setting is set to "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
Functions • To set whether to accept the printing job for print data or fax data during copy opera-
tion.
Use • To refuse print data or fax data during copy operation.
Accept
Receive Only : Print data or fax data will be printed when the copy operation is fin-
Setting/ • The default setting is Accept.
Procedure
N. Automatic Image Rotation
• [It will be displayed only when the following setting is set to "Level 1" or "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
Functions
• Sets whether to automatically rotate images to print if the original and specified
paper directions are not consistent with each other.
Use
Setting/ • The default setting is ON.
Procedure
8.5.4

Scan/Fax Settings

A. JPEG Compression Level
Functions • To set the JPEG compression method when scanning with JPEG while in scan/fax
mode.
Use • To change the compression rate when JPEG scanning.
High Quality
Standard
High Compression: Makes the compression rate higher and puts priority in lower-
Setting/ • The default setting is Standard.
Procedure
High Quality
: Receives the print data or fax data to print.
ished.
"Accept"
"ON"
: Lowers the compression rate and puts priority in quality while
scanning.
: Compression rate and quality are normally balanced while
scanning.
ing the data volume while scanning.
"Standard"
8. Utility Mode
Receive Only
OFF
High Compression
219