Konica Minolta bizhub C353 Service Manual page 336

Field Service Ver. 3.0 Jan. 2008
<Discovery User Permissions>
Functions
• To set whether or not to enable the discovery authority user which is used for SNMP
v3.
Use
Setting/ • The default setting is ON.
Procedure
<Discovery User Name Settings>
Functions
• To set the name of the discovery authority Users which is used for SNMP v3.
Use
Setting/ 1. Touch [Discovery User Name].
Procedure 2. Enter the discovery user name (up to 32 characters) on the on-screen keyboard, and
touch [OK].
NOTE
• The user name same with the read user name or the write user name cannot
be set.
<Read User Name Settings>
Functions
• To set the read-only user name used for SNMP v3.
Use
Setting/ 1. Touch [Read User Name].
Procedure 2. Enter the read user name (up to 32 characters) on the on-screen keyboard, and
touch [OK].
NOTE
• The user Name same with the discovery user name cannot be used.
<Security Level>
Functions • To set the security level of the read-only user used for SNMP v3.
Use • To use when changing the security level of the read-only user.
OFF
auth-password
auth-Password/privpassword
Setting/ • The default setting is auth-password/privpassword.
Procedure
OFF
<Password Setting>
Functions
• To set the Authentication password for the read-only User which is used for SNMP
v3.
Use
Setting/ 1. Select a type of password.
Procedure 2. Enter the password (up to 32 characters) on the on-screen keyboard, and touch
[OK].
"ON"
: No authentication will be conducted when the read-only
user accesses.
: Conducts authentication only for the authentication pass-
word when the read-only user accesses.
: Conducts authentication by authentication password and
privacy password when read-only User accesses.
auth-password
8. Utility Mode
OFF
"auth-password/privpassword"
291