Konica Minolta bizhub C353 Service Manual page 222

Field Service Ver. 3.0 Jan. 2008
[1]
[2]
[2]
[1]
A00JF2C449DA
[1]
A00JF2C450DA
[2]
A00JF2C601DA
16. Place the scanner drive cable to the
pulley D [2] via the pulley C [1].
NOTE
• Make sure to hook the scanner
drive cable to the outside groove of
the pulley D [2].
17. Put the scanner drive cable into the
IR frame hole [2] via the pulley D [1].
18. Hook the end of the spring [1] to the
wire and the other end to the hook
[2] on the IR left frame.
6. Other
177