Konica Minolta bizhub C353 Service Manual page 326

Field Service Ver. 3.0 Jan. 2008
F. LDAP Settings
• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Enabling LDAP
Functions • To set whether to enable or disable the LDAP function.
Use • To use LDAP function.
Setting/ • The default setting is OFF.
Procedure
(2) Setting Up LDAP
• Registration and/or setting concerning the LDAP server can be conducted.
• Touch [Setting Up LDAP], and select the optional blank key to register and/or set.
<LDAP Server Name>
Functions
• Set the LDAP server name.
Use
Setting/ 1. Touch [Server Name].
Procedure 2. Enter the server name (up to 32 one-byte characters) on the on-screen keyboard,
and touch [OK].
<Max. Search Results>
Functions • To set the Max. results of address for LDAP search.
Use • To change the Max. results of address for LDAP search.
Setting/ 1. Touch [Max. Search Results].
Procedure 2. Press the Clear key.
3. Enter the Max. Search result numbers between 5 and 1000 using the 10-key pad.
<Timeout>
Functions • To set the Max. timeout period for LDAP search.
Use • To change the Max. timeout period for LDAP search.
Setting/ 1. Touch [Timeout].
Procedure 2. Press the Clear key.
3. Enter the timeout period between 5 and 300 using the 10-key pad.
<Initial Setting for Search Details>
Functions • To set the initial items for search conditions in LDAP detail search.
Use • To set the initial items for search conditions in LDAP detail search.
Setting/ 1. Touch [Initial Setting for Search Details].
Procedure 2. Touch the key about condition for each search item, and select the condition.
ON
8. Utility Mode
"OFF"
281