Konica Minolta bizhub C353 Service Manual page 299

8. Utility Mode
(7) External Memory Function Settings
Functions • This operation enables or disables functions using an external memory connected to
this machine.
Use
• Capability to enable [Save Document] and [Print Document] separately.
Save Document : a function that saves scanned documents into the external memory
Print Document : a function that prints and sends documents saved in the external
Setting/ <Save Document>
Procedure • The default setting is OFF.
<Print Document>
• The default setting is ON.
K. Standard Size Setting
• It will be displayed only when the following setting is set to "Level 2."
[Service Mode] → [Enhanced Security] → [Administrator Feature Level]
(1) Original Glass Original Size Detect
Functions • To change the document size detection table.
Use • Use to change the setting for the document size detection table.
Setting/ • The default setting is Table1.
Procedure
(2) Foolscap Size Setting
Functions • To set the size for foolscap paper.
Use • Upon setup.
• To change the size for foolscap paper.
Setting/ • Select the size from among the following five.
Procedure
220 x 330 mm
L. Stamp Settings
(1) Header/Footer Settings
Functions
• Saves or deletes header/footer settings.
• Able to obtain registered header/footer data by [Application] → [Stamp/Composition]
Use
Setting/
• Touch [New] to register new headers and footers.
Procedure
254
using [Save Document] in the box mode.
memory using [Use Document] in the box mode.
ON
"ON"
"Table1"
8 1 / x 13 8 1 /
2 4
Field Service Ver. 3.0 Jan. 2008
"OFF"
OFF
Table2
x 13 8 1 / x 13 1 /
8 4
"8 x 13"