Hard Disk Drive (Hdd); Main Drive Unit - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 3.0 Jan. 2008
6.3.31

Hard disk drive (HDD)

1. Remove the hard disk drive unit.
See the steps 1 to 8 of printer control board removing procedure.
See P.136
[1]
[2]
NOTE
• When the hard disk is replaced, select [State Confirmation] → [Memory/HDD Adj.]
→ [HDD Format] in Service Mode for logical format.
6.3.32

Main drive unit

1. Remove the transfer belt unit.
See P.43
2. Remove the high voltage unit.
See P.142
3. Remove the Color PC motor.
See P.154
4. Remove the transport motor.
See P.154
[1]
[2]
[3]
A02EF2C084DA
[2]
A02EF2C085DA
2. Disconnect the connector [1].
3. Remove four screws [2], and remove
the hard disk drive [3].
5. Remove the harness from the wire
saddle [1] and the harness cover [2].
6. Other
113