Konica Minolta bizhub C353 Service Manual page 792

Field Service Ver. 2.0 Jan. 2008
B. Manual adjust: Read Pos Adj
a
5. Call the Service Mode to the screen.
See P.338 of the main body service manual.
6. Touch [ADF].
A01HF3E537DA
[1]
A01HF3C516DA
9J07F3C526DA
7. Mechanical adjustment
8. Make sure that the result is OK.
9. Touch [END].
10. Touch [Exit] on the Service Mode
screen.
11. Turn OFF the main power switch,
wait for 10 sec., then turn the switch
ON.
NOTE
If the result is Unable:
• Check that the chart is in the cor-
rect place.
• Make the manual adjustment on the
[Read Pos Adj] screen.
See P.47
1. Place the chart [1] in the document
feed tray (with the side having an
arrow facing up).
2. Make a full size copy of the chart.
3. Check that the difference in the
widths of a between the chart and
the copy sample falls within the
specified range.
Specifications: 0 ± 1.0 mm
4. If the difference in the width of a falls
outside the specified range, make
the following adjustment.
47